JX Series Metering Centrifugal Slurry Pump Plunger Type

JX Series Plunger-Type Metering Pump, Centrifugal Pump

Main Performance Parameters

• Max flow rate: 940L/h
• Max discharge pressure: 50Mpa
• Turndown ratio 10:1, steady-state accuracy ± 1%
• Max suction lift: 2.5m water column
• Medium temperature: -10℃--100℃
• The highest ambient temperature: +40C, the highest elevation: 1000m

Major Features

• Hard and compact design, small pump head, and optimized connection.
• Plunder contacts medium directly with high volumetric efficiency. The transmission loss is lower at high pressure.
• Variable eccentric structural adjustment ensures smooth fluctuations in flow pulsation; new machine enables the result more accurate and reasonable.
• It is suitable for conveying non-solid particles media, high viscosity media, in high pressure environment; It is not recommended for corrosive pulp and flammable, explosive, dangerous chemicals!
• Adopt graphite fiber with superior sealing performance and long service life.

Control Mode

• Power supply: 380V/220V-50Hz/60Hz/three-phase/single-phase
• Variable frequency controller receives the external control signal and adjusts the stroke speed, input signal: 4-20 mA analog signal
• Motor controller determines three-phase motor by "on/off" mode, adjusts the output flow

Main Applications

It is widely used infields such as chemical, petrochemical, electricity and metallurgy etc.In particular,it is very popular in fields with high viscosity, high pressure and high temperature.

Main Components of the Fluid End

Flow/Pressure

Fluid End

Interface

Note: the red parameters are standard configuration.

Electric Motor

When selectingthe variable-frequency motor, its power should be at greater level.

JX Series Dimensions